D-Link DI-1750 Reference Manual page 483

dial timeout time1 time2
In default case: numlen = 10,
seconds
13.1.3 Configure ivr one-dial mode
If you enable one-dial mode, it won't enable single authentication to a special user, so it can only
execute uniform authenticating to all one-dial users.
To configure one-dial mode, you are only needed to configure gw-authen-h323Command in global
configure mode. Please perform the following configuration in global mode:
gw-authen-h323
There's no this switch by default.
13.1.4 Configure ivr record mode
1. Configuration in IVR dial-peer
To configure record mode, you should first configure pattern name and ivr access number in dial-peer
configure mode. Please perform the following configurations in dial-peer ivr configure mode:
destination-pattern des-num
app ivrl_record
As to record you are needed to configure some parameters. At first you should configure the aim file
name of the record, thus the record file can be achived. Default file name is "user". As to the file
recorded by the user himself, after the rebooting the the router, it will record some child files and these
file names are increase from "1".
For an example, given a file name is "user", then the first record file will be "user/1", the second will be
"user/2", and so on.
2. Configure record file name
Please perform the following configuration in ivr configure mode:
file record-gather-name filename
The parameter is the string of record file name. It is "user" by default.
After having configured the aim record file name you will care the time of once recording. We have
supplied the default once recording time and you can precise it into seconds or 0.1 second in which the
record will be more perfect.
3. Configure the default recording time
We offered time parameters in two different units, but they are both the once recording time. In the two
parameters the minimum will take effect, and in default they are 300 (s) and 100 (0.1s). Please perform
the following configuration in ivr configure mode:
record time time1 time2
Cofigure the wait time of first dial and whole dial.
dialing-time = 3
Command
Enable one-dial authentication.
Command
Configure ivr access number.
Configure record function of this ivr pattern.
Command
Command
Configuring the default time of recording
Model Name
,dial timeout time1 = 30 seconds, time2 = 60
Function
Function
Function
Configuring integrated filename.
Function
- 481 -