D-Link DI-1750 Reference Manual page 352

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

Please input a digital number:Please input a string:200
(00)acct-port
(01)<cr>
Please Input the code of command to be excute(0-1): 0
(00)<0-65536>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:Please input a string:500
(00)<cr>
Please Input the code of command to be excute(0-1): 0
Will you excute it? (Y/N):y
2、To specify the shared kay of RADIUS server
[DEFAULT@Router /config/]#radius
(00)challenge-noecho
(01)deadtime
(02)key
......
Please Input the code of command to be excute(0-8): 2
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:123456 (Input key,here is only for example)
Will you excute it? (Y/N):y
To customize communication between the router and the RADIUS server, use the following optional
radius global configuration commands:
Command
radius retransmit retries
radius timeout seconds
radius deadtime minutes
Example:
[DEFAULT@Router /config/]#radius
......
(04)retransmit
(05)server
......
Please Input the code of command to be excute(0-8): 4
(00)<0-100>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:Please input a string:5 (Input retris,here is only for example)
Will you excute it? (Y/N):y
[DEFAULT@Router /config/]#radius
......
(06)timeout
(07)vsa
(08)test
Please Input the code of command to be excute(0-8): 6
(00)<1-1000>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:Please input a string:30 (Input the time value of timeout,here is only for example)
Will you excute it? (Y/N):y
Model Name
UDP port for RADIUS accounting server (default is 1646)
Port number
Data echoing to screen is disabled during Access-Challenge
Time to stop using a server that doesn't respond
Encryption key shared with the RADIUS servers
Key string
Specify the number of times the router transmits
each RADIUS request to the server before giving
up (default is 2).
Specify the number of seconds a router waits for a
reply to a RADIUS request before retransmitting
the request.
Specify the number of minutes that marked a
RADIUS server as "dead", which is not responding
to authentication requests.
Search iterations of the RADIUS server list
Specify a RADIUS server
Number of times to retransmit (default 2)
Time to wait for a RADIUS server to reply
Vendor specific attribute configuration
Radius test
Wait timeout in seconds
- 350 -
Purpose

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents