D-Link DI-1750 Reference Manual page 141

ip address
5.11.12 Configuring PRI Dialer map of destination address
PRI interface can access by multi-user or dialing initiative multi-network terminal,it will be realize by
interface configuration Dialer Map.For different network terminal,it can ensure PRI calling user's
number by IP address. Particular is in "dialing configuration command reference".
Configure PRI calling user's number which IP address is appointing.please view 5.11.6 .
dialer map ip-address number
5.11.13 ISDN BRI Interface Configuration Examples
1. Example 1
connect with the internet through ISDN , the remote is access server
Network requirement: D-LINK 1700 router interconnects with access server through the ISDN BRI
interface and implement IP network protocol.
Configure the ISDN BRI interface of D-LINK 1750 router:
[DEFAULT@Router /config/]#isdn
(00)switch-type
(01)tei-negotiation
Please Input the code of command to be excute(0-1): 0
(00)basic-1tr6
(01)basic-5ess
......
Please Input the code of command to be excute(0-10): 1
Will you excute it? (Y/N):y
！Encapsulating the datalink layer protocol PPP（the default protocol is PPP）
[DEFAULT@Router /config/]#interface
......
(03)Async
(04)BRI
......
Please Input the code of command to be excute(0-11): 4
Please input a interface name:b2/0 (input the interface name)
Will you excute it? (Y/N):y
Key Word:
Model Name
Seting IP address of port.
Command
Configure PRI calling user's number which IP address is
appointing
Figuer 5-13
Select the ISDN switch type
Set when ISDN TEI negotiation should occur
1TR6 switch type for Germany
AT&T 5ESS switch type for the U.S.
Asynchronous interface
ISDN Basic Rate Interface
Function
- 139 -