D-Link DI-1750 Reference Manual page 498

14.2.12 Example of LLC2 configuration
You can configure the number of LLC2 frames received before the ACK. In this example, at the time 0,
two information frames are received, it doesn't reach the max number 3, so the ACK frames are not
sent. If set the 3
active, and then ACK will be sent out.
Select the IIC2 commands from the interface commands of the global configuration list, all IIC2
selection as fellow:
Key Word:
U(undo) D(default) Q(quit)
(00)ack-max
(01)ack-delay-time the Max time to delay the acknowledgment of I-frames
(02)holdqueue
(03)idle-time
(04)local-window
(05)n2
(06)t1-time
(07)tbusy-time
(08)tpf-time
(09)trej-time
Please Input the code of command to be excute(0-9): 0
Input 0，select ack-max item
Key Word:
Q(quit)
(00)<1-255> number
Please Input the code of command to be excute(0-0): 0
Please input a digital number:3
Input 3，setting the max-number of I frame 3
Will you excute it? (Y/N):y
Select the IIC2 commands from the interface commands of the global configuration list, all IIC2
selection as fellow:
Key Word:
U(undo) D(default) Q(quit)
(00)ack-max
(01)ack-delay-time the Max time to delay the acknowledgment of I-frames
(02)holdqueue
(03)idle-time
(04)local-window
(05)n2
(06)t1-time
(07)tbusy-time
(08)tpf-time
(09)trej-time
Please Input the code of command to be excute(0-9):1
Input 1，select ack-delay-time item
Key Word:
Q(quit)
(00)<10-60000> millseconds
Please Input the code of command to be excute(0-0): 0
Please input a digital number:800
Input 800，setting ACK-delay time 800
Will you excute it? (Y/N):y
rd
ACK frame sent by router can't be received during 800 ms, the delay timer will be
the Max I-frames received before sent acknowledgment
the max queue lenght
the timer for idle
the local window size
the retrying counts
the timer of receiving an acknowledgment
the timer of re-querying remote busy
the timer of receive a response PDU(F=1)
the timer of receiving a reply to a sent REJ PDU
-- the Max I-frames received before sent acknowledgme
the Max I-frames received before sent acknowledgment
the max queue lenght
the timer for idle
the local window size
the retrying counts
the timer of receiving an acknowledgment
the timer of re-querying remote busy
the timer of receive a response PDU(F=1)
the timer of receiving a reply to a sent REJ PDU
-- ack-delay-time
Model Name
- 496 -