Table of Contents
Advertisement
Configuration
Log in
To access the web interface, open a web browser and enter the IP address of the router (by default this is 10.0.0.2) into the address bar.
When the login page of the G413K is displayed, enter the username and password you set on step 4 of the setup wizard. By default, the login
details are admin for the username and admin for the password if you chose to not change the details on the wizard.
Click Log In to proceed.
Note: If you cannot remember your password or cannot log in, follow the factory reset procedure to restore the router to its default settings.
The web interface is used to set up and change settings on the G413K. Follow the steps below to access the web interface and start setting up
the G413K.
17
Advertisement
Table of Contents
