D-Link DI-1750 Reference Manual page 289

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

ip domain dynamic enable
no ip domain dynamic enable
In order to enable update function of dynamic DNS, you should input the command
all the arguments will be listed:
(00)access-list
......
(03 domain
......
Please Input the code of command to be excute(0-20):
Input 3,selcet domain,and it will hint:
(00) lookup
(01) dynamic
......
Please Input the code of command to be excute(0-0):
Input 1,select dynamic, and it will hint:
(00)enable
(01)period
Input 0,select enable
6.14.14 Set the period of DNS update
In congure use the following command:
ip domain dynamic period seconds
no ip domain dynamic period
In order to set the period of DNS update, you should input the command
be listed:
(00)access-list
......
(03 domain
......
Please Input the code of command to be excute(0-20):
Input 3,select domain, and it will hint:
(00) lookup
(01) dynamic
......
Please Input the code of command to be excute(0-0):
Input 1,select dynamic, and it will hint:
(00) enable
(01) period
Input 1,select period, and it will hint:
(00) <1 - 604800>
Input 0,input the time value.
6.14.15 Bind the domain name to a IP address or IP address of interface
This command doesn't support binding the second IP address to a domain name.
After the command is using, the changing of the IP address of interface will update the mapping in the
primary server, that is, dynamic domain updating.
In general, it needs to update in the following cases:
(1)
When the router reboots, it should register to the primay server at once.
Model Name
Named access-list
IP DNS Resolver
Enable IP DNS hostname translation
DNS dynamic update function
DNS dynamic update function
Specify period for DNS update
Command
Named access-list
IP DNS Resolver
Enable IP DNS hostname translation
DNS dynamic update function
DNS dynamic update function
Specify period for DNS update
-- seconds for dns update
Enable domain dynamic
Disable domain dynamic
3
1
Function
Set time of updating period.
Restore to the default.
3
1
- 287 -
in configure, and
ip
and all the arguments will
ip

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents