D-Link DI-1750 Reference Manual page 106

1. Configure CBCP on this interface
ppp callback request cbcp
ppp callback accept
Key Word:
Q(quit)
......
(26)ppp
(27)priority-group
......
Please Input the code of command to be excute(0-34): 26
Key Word:
U(undo) D(default)
(00)authentication
(01)authorization
(02)callback
......
Please Input the code of command to be excute(0-9): 2
Key Word:
Q(quit)
(00)accept
(01)initiate
(02)request
Please Input the code of command to be excute(0-2): 2
Key Word:
Q(quit)
(00)authentication
(01)cbcp
(02)<cr>
Please Input the code of command to be excute(0-2): 1
Will you excute it? (Y/N):y
2. Configure callback telephone number:
dialer caller xx
user xx
callback-dialstring {* | xx}
dialer called {* | xx ; xx ; xx}
♦ Configuring the callback dialstring designated by Caller on the caller/called:
[Key Word:
Q(quit)
......
(09)description
(10)dialer
......
Please Input the code of command to be excute(0-32): 10
Key Word:
U(undo)
(00)called
Command
Assign a priority group to interface
Q(quit)
Set PPP link authentication method
Set PPP network authorization method
Set CALLBACK parameters
Accept a callback request
Initiate callback without PPP callback negotiation
Request a callback
Request a callback of authentication
Request a callback of cbcp
Command
xx
password
D(default) Q(quit)
Model Name
Purpose
Configure to start CBCP negotiation on Caller.
Configure to start the receiving of CBCP
negotiation on Answerer.
Point-to-point protocol
Purpose
Configure the callback telephone number that
specified by Caller.
Configure the telephone number on Answerer
that the number is specified by Caller, or
specified by Answerer, or select one from
Answerer provided numbers by Caller.
Set the interface description
Dial-on-demand routing (DDR) commands
Dialer called string
- 104 -