D-Link DI-1750 Reference Manual page 88

(01)destination
(02)xot
Please Input the code of command to be excute(0-2): 2
Key Word:
Q(quit)
(00)pvc
(01)svc
Please Input the code of command to be excute(0-1): 1
Key Word:
Q(quit)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:12345678 (input x121 address)
Key Word:
Q(quit)
(00)<A.B.C.D>
Please Input the code of command to be excute(0-0): 0
Please input a IP Address:192.168.0.1 （iput ip address）
Key Word:
Q(quit)
(00)source
(01)<cr>
Please Input the code of command to be excute(0-1):1
Will you excute it? (Y/N):y
5.5.16 Configuring the X.25-TCP switching gateway
D-LINK router can implement the datagram switching between X.25 and TCP/IP.
User the following command in configuration mode:
Translate (undo) tcp ip ip-address
svc intr1 x121address1 lport locport
rport
remport
x121address2]
translate (undo) tcp ip ip-address
pvc intr1 pvc#1 lport locport rport
remport [backup intr2 pvc#2]
[DEFAULT@Router /config/]#translate
Key Word:
U(undo) D(default)
(00)x25
(01)tcp
Please Input the code of command to be excute(0-1): 1
Key Word:
Q(quit)
(00)ip
Please Input the code of command to be excute(0-0): 0
Key Word:
Q(quit)
(00)<A.B.C.D>
Please Input the code of command to be excute(0-0): 0
Please input a ip address:10.0.0.1 （input remote ip address）
Key Word:
Q(quit)
(00)pvc
(01)svc
Configure X25 over TCP route in X.25 switch table
Command
[backup intr2
Q(quit)
Translate to X.25 encapsulation
Translate packet between TCP and X.25
Specified the source IP address
Source IP Address
Use pvc to connect to remote
Use svc to connect to remote
Model Name
Add/delete a SVC route in X.25 switch table
Add/delete a PVC route based on XOT in X.25 switch table
Add/delete a SVC(xot) route in X.25 switch table
Destination X.121 address
Remote IP Address
local source interface
Purpose
Set a mapping between the source IP address and
destination X.121 address, configure the local and
remote TCP monitor interface
Set a mapping between the source IP address and
destination PVC address, configure the local and remote
TCP monitor interface
- 86 -