D-Link DI-1750 Reference Manual page 413

(19)job Job parameters and statistics
(20)l2tp L2TP information
--More--
18
Input 18，select ip option：
Key Word:
Q(quit)
(00)access-lists List IP access lists
(01)as-path-list Information of AS-Path list
(02)beigrp Show BEIGRP information
(03)bgp BGP information
(04)cache IP route cache
(05)community-list Information of community-list
(06)dhcpd DHCP Server information
(07)fast-switch Fast-switch information
(08)interface IP interface status and configuration
(09)irdp ICMP Router Discovery Protocol
(10)local Specify local options
(11)nat IP NAT information
(12)ospf show OSPF information
(13)prefix-list Prefix-list definition
(14)rip Routing Information Protocol(RIP)
(15)route show route table
(16)rsvp - rsvp information
(17)rtp Rtp parameters
(18)sockets Open IP sockets
(19)tcp Tcp parameters
(20)traffic Traffic statistics
--More--
17
Input 17，select rtp option：
Key Word:
Q(quit)
(00)header-compression RTP/UDP/IP header-compression statistics
Please Input the code of command to be excute(0-0): 0
Input 0，select header-compression option
Key Word:
Q(quit)
(00)Serial Serial interface
(01)Async Asynchronous interface
Please Input the code of command to be excute(0-1): Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0): 0
Input 0，<cr>:
Will you excute it? (Y/N):y
The Screen will display CRTP information like the following:
RTP/UDP/IP header compression statistics:
Interface Serial2/0:
You must use the command in global configuraion mode.
9.3.6 CRTP Debugging
Command
debug
header-compression
display the information of the received and transformed
config-ip rtp
CRTP packets information.
Model Name
Purpose
- 411 -