D-Link DI-1750 Reference Manual page 85

x25 (undo)
[rfc1006|transparent|user]
x25 (undo) tcp iso-address line
Key Word:
Q(quit)
......
(29)snmp
(30)x25
Please Input the code of command to be excute(0-30): 30
Key Word:
U(undo) D(default)
......
(24)tcp
(25)wsize
......
Please Input the code of command to be excute(0-26): 24
Key Word:
Q(quit)
(00)iso-address
(01)pkt-format
(02)user-data
......
Please Input the code of command to be excute(0-5): 0 （you can input 0、1、2 to set various parameters
respectively）
Key Word:
Q(quit)
(00)Line
Please Input the code of command to be excute(0-0): 0
Please input a string:123456 （input Hex ISO address Data）
Will you excute it? (Y/N):y
5.5.13 Configure PVC switching between X.25 interfaces
D-LINK router can be used as X.25 switch. It includes PVC switching and SVC switching. The two
interfaces used for PVC switching must has untapped PVC.
In configuration mode, user can use the following commands to set the local PVC switching:
x25switch (undo) connect port1
port1_pvc_no port2 port2_pvc_no
[DEFAULT@Router /config/]#x25switch
Key Word:
U(undo) D(default)
(00)connect
(01)destination
(02)xot
Please Input the code of command to be excute(0-2): 0
Key Word:
Q(quit)
(00)Async
(01)Serial
Please Input the code of command to be excute(0-1): 1
Please input a interface name:s1/0 (input the interface name)
Key Word:
Q(quit)
tcp pkt-format
Modify SNMP interface parameters
Set parameters for X.25
Q(quit)
Set X25-TCP parameters related
Set X.25 level 3 window size
Set X.25 extend ISO address
Set X25-TCP switching packet format
Set X.25 user data
Hex ISO address Data
Command
Q(quit)
Add/delete a PVC route in X.25 switch table
Add/delete a SVC route in X.25 switch table
Configure X25 over TCP route in X.25 switch table
Async interface
Serial interface
Model Name
Set the switching packet-format
Set the ISO extension address used by x25-tcp in the
interface
Purpose
Set the PVC switching
- 83 -