D-Link DI-1750 Reference Manual page 126

Please input a digital number:Please input a string:100 (input the group-number)
Will you excute it? (Y/N):y
Repeat Steps 1 through 4 for configure other DSL interfaces.
Notes:
To configure config-multi-link group interface, the PPP configuration will automatic synchronize with corresponding multilink
group interface
5.7.14 PPP Configuration Example
1. CHAP Configuration Example
The following configuration examples enable CHAP Authentication Protocol on serial interface 1/0 of
two devices.
Configure the router1
！
hostname router1
！
interface s1/0
encapsulation ppp
ppp authentication chap
ppp chap hostname user1
！
username user2 password 0 secret12
！
configure the router2
！
hostname router2
！
interface s1/0
encapsulation ppp
ppp authentication chap
ppp chap hostname user2
！
username user1 password 0 secret12
！
2. Multilink PPP Configuration Example
The following examples configure Multilink PPP. First example is application on one BRI interface, the
second apply to configure the DSL interface that belonging to multilink group interface, the third
example is configuration of multilink by virtual-templat.
Multilink PPP on a single ISDN Interface Example
!
interface bri 0/3
description connected to router
ip address 192.168.20.100 255.255.255.0
encapsulation ppp
dialer idle-timeout 30
dialer load-threshold 40 either
dialer map 171.1.1.8 name router 81012345678901
dialer-group 1
ppp authentication pap
ppp multilink
!
Model Name
- 124 -