D-Link DI-1750 Reference Manual page 43

(04)packetsize
......
Please Input the code of command to be excute(0-8): 4
Input 4, choose the item "packetsize", it will prompt:
(00)<484-17940>
Please Input the code of command to be excute(0-0): 0
Input 0, it will prompt:
Please input a digital number:Please input a string:
Input the maximum length of a data packet.
4.1.6 Supervise the status of SNMP
Use following command in the mode of global configuration to supervise the statistics about input and
output of SNMP, which is include the list of illegal community character string, amount of error and
request variable.
Command
show snmp
Input the command "show", all the parameters will be listed:
(00)alias alias for command
......
(33)snmp
......
Please Input the code of command to be excute(0-45): 33
Input 33, choose the item "snmp", it will prompt:
(00)host
(01)view
(02)<cr>
Please Input the code of command to be excute(0-2):
Choose the content you want to show.
4.1.7 Configure SNMP trap
To use following command to configure the SNMP trap that sent by Router, (the second task is
optional):
♦ Configure the Router-send trap
♦ Change the parameter of trap running
1. Configure the Router-send trap
♦ Use following command in the mode of global configuration, which is configures the Router to send
a trap to a host.
snmp-server
community-string [udp-port port]
[trap-type]
Input the command "snmp-server", it will prompt:
(00)community
(01)contact
(02)host
......
Please Input the code of command to be excute(0-8): 2
Input 2, choose the item "host", it will prompt:
(00)Hostname or A.B.C.D
Largest SNMP packet size
Packet size
Supervise the status of SNMP
SNMP statistics
show SNMP trap hosts
show SNMP views
Command
host Assign the receiver of trap message.
host
Enable SNMP; set community string and access privs
Text for mib object sysContact
Specify hosts to receive SNMP TRAPs
IP address of SNMP TRAP host
Model Name
Function
Function
- 41 -