D-Link DI-1750 Reference Manual page 402

Command
priority-list
interface interface-type
interface-number
medium | normal | low}
To configure the classification model of a PQ list by the interface models, you can input: priority-listin
the global configuration directory.
[DEFAULT@Router /config/]#priority-list
Key Word:
U(undo) D(default) Q(quit)
(00)<1-16> priority list number
Please Input the code of command to be excute(0-0): 0
Input 0, select <1-16>option, it will prompt to input the PQ number.
Please input a digital number:1
Note: Input 1-16 priority list number, 1 is only for example.
Key Word:
Q(quit)
(00)interface Establish priorities for packets from a named interface
(01)protocol Establish priorities for packets of a protocol
(02)queue-limit set queue limit for priority queue
(03)default set custom queue for unspecified packets
Please Input the code of command to be excute(0-3): 0
Input 0, select <interface>option：
Key Word:
Q(quit)
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
(03)Async Asynchronous interface
Please Input the code of command to be excute(0-3): 1
Note：Input the interface models here, 1 is only for example.
Please input a interface name:f0/0
Note：Input the interface name here, f0/0 is only for example.
Key Word:
Q(quit)
(00)high
(01)middle
(02)normal
(03)low
Please Input the code of command to be excute(0-3): 1
Note：Input the priority of the queue here, 1 is ony for example.
Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
Input y
Command
priority-list
default queue-number
To configure a classification model for those packets that don't meet any rule, you can input:
priority-listin the global cofiguration directory.
Model Name
list-number
Estabish a PQ for the packets of some specified
{high | interface
To assign a PQ for those packets that don't meet any
list-number
rule of the priority list, the default is normal
Purpose
Purpose
- 400 -