D-Link DI-1750 Reference Manual page 412

(09)nat NAT interface commands
(10)ospf set OSPF parameter for this port
(11)redirects Enable sending ICMP Redirect messages
(12)rip set RIP parameter for this port
(13)route-cache Enable fast-switching cache for outgoing packets
(14)rsvp RSVP interface command
(15)rtp Rtp parameters
(16)tcp Tcp parameters
(17)unnumbered Enable IP processing without an explicit address
(18)unreachables Enable sending ICMP Unreachable messages
Please Input the code of command to be excute(0-18): 15
Input 15，select rtp:
Key Word:
Q(quit)
(00)compression-connections Maximum number of compressed connections
(01)header-compression Enable RTP header compression
Please Input the code of command to be excute(0-1):0
Input 0，select compression-connections
Key Word:
Q(quit)
(00)<3-256> Number of connections
Please Input the code of command to be excute(0-0): 0
Input 0, select <3-256>option, it will prompt to input the max connection number:
Please input a digital number:Please input a string:45
Note：Input the max connection number of CRTP here, 45 is only for example.
Will you excute it? (Y/N):y
9.3.5 Display CRTP Compression Information
Command
show
header-compression
number] [detail]
The above commands need to be configured under the global configuration directory.
[DEFAULT@Router /enable/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup Bakup status
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
(08)controller Interface controller status
(09)cpu cpu usage information
(10)debug State of each debugging option
(11)dhcp DHCP information
(12)dialer Dialer parameters and statistics
(13)frame-relay Display Frame Relay state
(14)frswitch Display Frame Relay switch state
(15)hdlc HDLC parameters and statistics
(16)hosts Host table
(17)interface interface status and configuration
(18)ip IP information
display CRTP compression imformation
ip rtp
[type
Model Name
Purpose
- 410 -