D-Link DI-1750 Reference Manual page 394

Please input a string:name
Note: Input the list name here, name is only for example.
Will you excute it? (Y/N):y
Here we completed the configuration of the class map of access list classification.
9.2.6 ConfigureWRED
If you need to configure a WRED on an interface, you can choose random-detec command under the
global configureation directory after specifying the interface:
Command
config-random-detect
Key Word:
Q(quit)
......
(27)priority-group Assign a priority group to interface
(29)random-detect enable weighted random early detect on interface
(30)router routing protocol configuration
(31)service-policy Assign a priority group to interface
(32)show show configuration and status
(33)shutdown Shutdown the current interface
(34)snmp Modify SNMP interface parameters
(35)speed Configure speed operation
Please Input the code of command to be excute(0-35): 29（select random-detect）
Will you excute it? (Y/N):y
9.2.7 Configure CQ
If you want to configure CQ to an interface, you can use the command below in interface configuration
mode after the interface specified:
custom-queue-list list-number
If you need to configure a customed queue on more than one interfaces, you can select
custom-queue-list in the interface commands under the directory of global configuration:
Key Word:
Q(quit)
(00)arp set arp timeout
(01)backup Modify backup parameters
(02)bandwidth Set the interface bandwidth
(03)bridge-group Transparent bridging interface parameters
(05)chinese help message in Chinese
(06)chmem Change memory of system
(07)clear_drv clear interface statistic counter
(08)crypto Encryption module
(09)custom-queue-list Assign a custom queue list to interface
(10)default restore default configuration
(11)delay Set the interface delay
......
Please Input the code of command to be excute(0-35): 9（select custom-queue-list）
Will you excute it? (Y/N):y
Applying WRED to an interface.
Command
Applying CQ to the interface, list-number is the number
of the adopted customed queue list. The list argument is
any number from 1 to 16. There is no default
assignment.
Model Name
Purpose
Purpose
- 392 -