D-Link DI-1750 Reference Manual page 418

Key Word:
U(undo) D(default) Q(quit)
(00)access-group Specify access control for packets
(01)address IP address
(02)beigrp Enhanced Interior Gateway Routing Protocol
(03)directed-broadcast Enable forwarding of directed broadcasts
(04)fast-switch Fast-Switch interface commands
(05)helper-address Specify a destination address for UDP broadcasts
(06)irdp ICMP Router Discovery Protocol
(07)mask-reply Enable sending ICMP Mask Reply messages
(08)mtu Maximum Transmission Unit
(09)nat NAT interface commands
(10)ospf set OSPF parameter for this port
(11)redirects Enable sending ICMP Redirect messages
(12)rip set RIP parameter for this port
(13)route-cache Enable fast-switching cache for outgoing packets
(14)rsvp RSVP interface command
(15)rtp Rtp parameters
(16)tcp Tcp parameters
(17)unnumbered Enable IP processing without an explicit address
(18)unreachables Enable sending ICMP Unreachable messages
Please Input the code of command to be excute(0-18): 16
Input 16，select tcp option
Key Word:
Q(quit)
(00)compression-connections Maximum number of compressed connections
(01)header-compression Enable TCP header compression
Please Input the code of command to be excute(0-1): 0
Input 0，select compression-connections option
Key Word:
Q(quit)
(00)<3-256> Number of connections
Please Input the code of command to be excute(0-0): 0
Input 0，select <3-256> option：
Please input a digital number:Please input a string:4
Note： Input the max CTCP connection number of 3-256 here, 4 is only for example.
Will you excute it? (Y/N):y
9.4.5 Display CTCP Compression Information
Command
show
header-compression
number] [detail]
The above commands need to be used under the global configuration directory.
[DEFAULT@Router /enable/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup Bakup status
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
Display CTCP information.
ip tcp
[type
Model Name
Purpose
- 416 -