D-Link DI-1750 Reference Manual page 437

10.5.2 Set Idle Time for Busy Interfaces
When an interface has set up a link, another interface is need to set up a new link with it, that's called
competition. If the line-idle time exceeds the specified amount of time, the current call is disconnected
by DDR.
Key Word:
U(undo) D(default) Q(quit)
Key Word:
U(undo) D(default) Q(quit)
(00)called Dialer called string
(01)caller Dialer caller string
(02)dtr Set DTR dialing for interface
(03)enable-timeout Set time interval between line down and dialing
(04)fast-idle Set idle time when line contention
(05)hold-queue Set output hold queue length
(06)idle-timeout Set idle time before disconnecting line
(07)map Define multiple dial-on-demand numbers
(08)priority Set interface priority in dialer rotary group
(09)rotary-group Add this interface to a dialer rotary group
(10)string Set default telephone number
(11)wait-for-carrier-time Set the router wait for carrier time
Please Input the code of command to be excute(0-11):4（select fast-idle）
Key Word:
Q(quit)
(00)<1-2147483>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:2
Note：input the idle time of busy interface here,for example 2.
Will you excute it? (Y/N):y
10.5.3 Set dialer timeout
To set the minimum length of time an interface stays down before it is available to dial again after a line
is disconnected or fails.
Set line-down time: dialer enable-timeout seconds
Key Word:
U(undo) D(default) Q(quit)
(00)called Dialer called string
(01)caller Dialer caller string
(02)dtr Set DTR dialing for interface
(03)enable-timeout Set time interval between line down and dialing
(04)fast-idle Set idle time when line contention
(05)hold-queue Set output hold queue length
(06)idle-timeout Set idle time before disconnecting line
(07)map Define multiple dial-on-demand numbers
(08)priority Set interface priority in dialer rotary group
(09)rotary-group Add this interface to a dialer rotary group
(10)string Set default telephone number
(11)wait-for-carrier-time Set the router wait for carrier time
Please Input the code of command to be excute(0-11): 3（select enable-timeout）
Key Word:
Q(quit)
(00)<1-2147483>
Please Input the code of command to be excute(0-0): 0
Input 0，select option <1-2147483>
Please input a digital number:2
Fast idle time in seconds
enable-time in seconds
Model Name
- 435 -