D-Link DI-1750 Reference Manual page 280

6.13.3 Use RSVP Assistant Configuration Commands
On RSVP module implementation of current edition, user can process RSVP debug with assistant
configuration commands, including setting up of RSVP session and transmitting information of RSVP
path, path tear, resv, resv tear, offered by the module. This will affect very much on RSVP debug.
Use commands below in global configuration directory:
ip rsvp
session-dport {tcp | udp}
ip rsvp local sender session-id sender-ip-address
sender-sport [config-bw] [burst-size]
ip rsvp
sender-ip-address sender-sport [guarantee | load]
[config-bw] [burst-size]
Take the first command for an example.：
input ip Command，prompt is as below:
(00)access-list
......
(17)rsvp
......
Please Input the code of command to be excute(0-20): 17
input 17，Select rsvp option ，prompt is as below:
(00)local
Please Input the code of command to be excute(0-0): 0
input 0，Select local option ，prompt is as below:
(00)session
(01)sender
(02)reservation
Please Input the code of command to be excute(0-2): 0
input 0，Select session option ，prompt is as below:
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
input 0，Select A.B.C.D option ，prompt is as below:
Please input a IP Address:
input IP ，prompt is as below:
(00)<0-65535>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input port value ，prompt is as below:
(00)tcp TCP Transport
(01)udp UDP Transport
Please Input the code of command to be excute(0-0):
Select parameter .
6.13.4 How to Configure TOS and Precedence for RSVP Flow
To get better implementation of reservation, user can use commands offered by RSVP module to set
TOS and precedence of RSVP flow. This makes that a higher TOS is set when RSVP flow exceeds
reservation and a lower TOS is set when flow is in a special range of reservation. Precedence is the
same.
Use commands below in interface configuration state:
Command
local session session-ip-address
local reservation
Named access-list
Configure RSVP information
RSVP local configuartion
RSVP Session configuartion
RSVP Sender configuartion
RSVP Reservation configuartion
Destination address
Destination port
Model Name
With this command user can configure a
new RSVP session which can be used by
other commands.
This command makes user be able to send
out path message. Form no of this
command will send out path tear message.
This command makes user send out resv
session-id
message. Form no of this command will
send out resv tear message.
- 278 -
Purpose