Table of Contents
Advertisement
(02)sessions Show dialer sessions
Please Input the code of command to be excute(0-2): 0
Input 0，select interface
Key Word:
Q(quit)
(00)Serial Serial interface
(01)Async Asynchronous interface
(02)Dialer Dialer interface
Please Input the code of command to be excute(0-2): 0
Input 0，select option Serial
Please input a interface name:s2/0
note：Input the interface name here,for example S2/0.
Will you excute it? (Y/N):y
screen will display the information similar to below:
Serial2/0 - dialer type = DTR
Idle timer (2 secs), Fast idle timer (2 secs)
Wait for carrier (2 secs), Re-enable (2 secs)
Dial String Successes Failures Last called Last status
* 0 0 never
Dialer state is Line down
explaination of displayed information are as follows:
Dialer_Strings
Successes
Failures
Last_call
Idle timer
Fast Idle timer
Wait for carrier
Re_enable
10.5.11 Dailer Configuration Example
1. The example of dialing to Multiple points
interface s1/1
ip address 131.108.126.1 255.255.255.0
dialer wait-for-carrier-time 100
dialer map 131.108.126.10 5558899
dialer map 131.108.126.15 5555555
2. Configuring Dialer Rotary Groups Example
The example below defines the dialer-interface, and attaches the serial1/1 and serial1/2 to dialer
interface.
interface dialer 1
ip address 131.108.2.1 255.255.255.0
ip address 131.126.2.1 255.255.255.0 secondary
dialer map 131.108.2.5 1234567
dialer map 131.126.2.55 7654321
! Interfaces serial 1 and 2 are placed in dialer rotary group 1. All of
! the interface configuration commands
! applied to interface dialer 1 apply to these interfaces.
interface serial1/1
corresponding dialer strings in the dialer map
number of dialer map call successes
number of dialer map call failures
using time in the dialer map last call
set time with dialer idle-timeout command
set time with Dialer fast-idle command
set time with Dialer wait-for-carrier command
set time with dialer enable-timeout command
Model Name
- 439 -
Hide quick links:
Advertisement
Table of Contents
