D-Link DI-1750 Reference Manual page 167

(01)pool Name pool of global addresses
Please Input the code of command to be excute(0-1): 1
Input 1，select pool option，prompt is as below:
(00)WORD Pool name for global addresses
Please Input the code of command to be excute(0-0): 0
Input 0，select WORD option，prompt is as below:
Please input a string:
(00)overload Overload an address translation
(01)<cr>
Please Input the code of command to be excute(0-1): 0
Input 0, it will establish configuration of dynamic source address translation.
Step 4：
Input interface command, prompt is as below:
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
......
Please Input the code of command to be excute(0-10):
Specify inside interface type and number.
Step 5：
Select 18 option in the prompt, it will list all arguments:
(00)access-group
......
(09)nat NAT interface commands
......
Please Input the code of command to be excute(0-18): 9
Input 9, select nat option, prompt is as below:
(00)inside Inside interface for address translation
(01)outside Outside interface for address translation
Please Input the code of command to be excute(0-1): 0
Input 0, select inside option, it will sign the interface to be connected with inside network.
Step 6：
Input interface command in global configure directory, prompt is as below:
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
......
Please Input the code of command to be excute(0-10):
Specify outside interface type and number.
Step 7：
Select 18 option in the prompt, it will list all arguments:
(00)access-group
......
(09)nat NAT interface commands
......
Please Input the code of command to be excute(0-18): 9
Input 9, select nat option, prompt is as below:
(00)inside Inside interface for address translation
(01)outside Outside interface for address translation
Please Input the code of command to be excute(0-1): 1
Input 1, select outside option, it will sign the interface to be connected with outside network.
Note:
Model Name
Specify access control for packets
Specify access control for packets
- 165 -