D-Link DI-1750 Reference Manual page 334

Model Name
Please Input the code of command to be execute(0-1): 0
Input 0，choose * option.
7.5.9 The example of DVMRP configuration
This section includes a example of DVMRP configure. For DVMRP has no accordingly commands in
Cisco, it is passive. So we enable PIM-DM in the interface of Cisco in order to act as a DVMRP
interface.
DLINK router is configured as follows:
!
ip multicast-routing
!
interface Ethernet1/1
ip address 200.1.1.142 255.255.255.0
ip dvmrp
!
interface Ethernet2/1
ip address 192.168.20.142 255.255.255.0
ip dvmrp
!
Cisco2620 router is configured as follows:
!
ip multicast-routing
!
interface FastEthernet0/0
ip address 192.168.20.204 255.255.255.0
ip pim dense-mode
!
interface FastEthernet0/1
ip address 100.1.20.204 255.255.255.0
ip pim dense-mode
!
- 332 -