D-Link DI-1750 Reference Manual page 532

Key Word:
Q(quit)
(00)<4-30>
Please Input the code of command to be execute(0-0): 0
Please input a digital number:20
Will you execute it? [Y]:
[DEFAULT@lns /config/]#
16.1.8 Configure the Port Path Cost for Spanning Tree
Use the following commands to configure port path cost for spanning tree:
Command
spanning-tree [sstp | vlan
vlan-id] cost value
spanning-tree undo [sstp |
vlan vlan-id] cost
The following commands configure interface f1/0 path value to 24.
Current Status:f1/0
Key Word:
Q(quit)
(00)arp
(01)backup
......
(36)spanning-tree
(37)speed
(38)standby
(39)switchport
(41)vrrp
Please Input the code of command to be execute(0-41): 36
Current Status:f1/0
Key Word:
U(undo) Q(quit)
(00)vlan
(01)sstp
(02)cost
(03)port-priority
(04)bpdufilter
(05)bpduguard
(06)portfast
(07)guard
Please Input the code of command to be execute(0-7): 2
Current Status:f1/0
Key Word:
Q(quit)
(00)<1-200000000> interface cost value
Please Input the code of command to be execute(0-0): 0
Please input a digital number:24
Will you execute it? [Y]:
The following commands configure the following VLAN 200 f1/0 path value to 24.
Current Status:f1/0
Key Word:
Q(quit)
(00)arp
......
vlan mode forward time
Configure Path Value for Ports.
Cancle port path cost configuration.
Current Directory: config
set arp timeout
Modify backup parameters
Config spanning-tree protocol on port
Configure speed operation
HSRP configuration commands
Set port switching characteristics
VRRP configuration commands
Current Directory: config
Setup spanning-tree protocol interface vlan function
Setup spanning-tree protocol interface sstp function
Setup spanning-tree protocol port cost
Setup spanning-tree protocol port priority
Setup spanning-tree protocol bpdufilter function
Setup spanning-tree protocol bpduguard function
Setup spanning-tree protocol portfast function
Setup spanning-tree protocol guard function
Current Directory: config
Current Directory: config
set arp timeout
Model Name
Function
- 530 -