D-Link DI-1750 Reference Manual page 117

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

Please input a string:1234 (input dial-string,this is just an example)
Will you excute it? (Y/N):y
Key Word:
U(undo)
......
(10)dialer
(11)dialer-group
......
Please Input the code of command to be excute(0-32): 11
Key Word:
U(undo)
(00)<1-10>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:Please input a string:5 (input dial list number,this is just an example)
Will you excute it? (Y/N):y
Key Word:
U(undo)
......
(23)peer
(24)ppp
......
Please Input the code of command to be excute(0-32): 24
Key Word:
U(undo)
(00)authentication
(01)authorization
......
Please Input the code of command to be excute(0-9): 0
(00)chap
(01)ms-chap
(02)pap
Please Input the code of command to be excute(0-2): 0
(00)WORD
......
(04)pap
(05)<cr>
Please Input the code of command to be excute(0-5): 5
Will you excute it? (Y/N):y
Key Word:
U(undo)
......
(23)peer
(24)ppp
......
Please Input the code of command to be excute(0-32): 24
Key Word:
U(undo)
......
(07)multilink
(08)pap
(09)timeout
Please Input the code of command to be excute(0-9): 7
Will you excute it? (Y/N):y
5.7.12 Configuring MLP on Multiple ISDN BRI Interfaces
To enable MLP on multiple ISDN BRI interfaces, set up a dialer rotary interface and configure it for
Multilink PPP, then configure the BRI interfaces separately and add them to the same rotary group.
D(default)
Q(quit)
Dial-on-demand routing (DDR) commands
Assign interface to dialer-list
D(default)
Q(quit)
Dialer list number
D(default)
Q(quit)
Peer parameters for point to point interfaces
Point-to-point protocol
D(default)
Q(quit)
Set PPP link authentication method
Set PPP network authorization method
Challenge Handshake Authentication Protocol (CHAP)
Microsoft Challenge Handshake Authentication Protocol(MS-CHAP)
Password Authentication Protocol (PAP)
Use an authentication list with this name
Password Authentication Protocol (PAP)
D(default)
Q(quit)
Peer parameters for point to point interfaces
Point-to-point protocol
D(default)
Q(quit)
Make interface multilink capable
Set PAP authentication parameters
Set PPP timeout parameters
Model Name
- 115 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents