D-Link DI-1750 Reference Manual page 466

1750_config_dialpeer#destination-pattern 260.
1750_config_dialpeer#session target ipv4: 10.1.2.2
1750_config_dialpeer#exit
In the previous configuration example, the last one digits of V100's set-dial-peer 3 was replaced with
wildcards ".". This means that from 2621(10.1.2.2), calling any number string that begins with the digits
"176" will result in a connection to 1750 router (10.1.1.2). This implies that 1750 router (10.1.1.2)
services all numbers beginning with those digits and follow a digit behind.
The shutdown and codec command did not use in the previous configuration example, please see the
"Correlative Voice Command".
12.4.5 Create a Dial Peer Configuration Table
There is specific data relative to each dial peer that needs to be identified before you can configure dial
peers in Voice over IP. One way to do this is to create a peer configuration table.
Using the example in Figure 4, 1750 router (inserted two dual-port FXS voice cards) with an IP address
of 10.1.1.2, connects a small sales branch office to the main office through 3660 router (inserted one
dual-port FXS voice card) with an IP address of 10.1.2.2. There are four telephones in the sales branch
office that need to be established as dial peers. 3660 router is the primary gateway to the main office;
as such, it needs to be connected to the company's PBX. There are four devices that need to be
established as dial peers in the main office, all of which are basic telephones connected to the PBX.
Following table is the peer configuration table for the example illustrated in Figuer 12-4.
Dial Peer
1750
1
2
3
4
10
3660
1
2
12.4.6 Configure POTS Dial Peers
To configure a POTS peer, you need to define its telephone number(s), and associate it with a voice
port through which calls will be established. To enter the dial-peer configuration mode and select
POTS as the method of voice-related encapsulation, use the following command in global configuration
mode:
D
VoIP Voice Network Example
Figuer 12-4
Number Types
1761 POTS
1762 POTS
1763 POTS
1764 POTS
900. VoIP
VoIP
176．
900. POTS
Model Name
Voice Port
1/0
1/1
2/0
2/1
10.1.2.2
10.1.1.2
1/0和1/1
- 464 -
D
Target IP Address