D-Link DI-1750 Reference Manual page 284

In order to enable IP DNS hostname translation, you should input command
show all the arguments:
(00)access-list
......
(03 domain
......
Please Input the code of command to be excute(0-20):
Input 3，select domain, it will hint：
(00) lookup
(01) dynamic
......
Please Input the code of command to be excute(0-0):
Input 0，select lookup.
6.14.5 Specify the IP address of a domain name server
It may assign serveral name servers,but can only appoint six at most.The name server assigned before
will be queried earlier. When we use the no format without any parameter,it express for delete all the
name servers.
In congure use the following command：
ip domain name-server ip-address
no ip domain name-server [ip-address
In orde to specify the IP address of a domain name server, you should input command
show all the arguments:
(00)access-list
......
(03 domain
......
Please Input the code of command to be excute(0-20):
Input 3，select domain, it will hint：
(00) lookup
.......
(03) name-server
......
Please Input the code of command to be excute(0-0):
Input 3，select name-server, it will hint：
(00) A.B.C.D
Input 0，select A.B.C.D, input IP address.
Note：
no ip domain name-server ip-address
ip-address
no ip domain name-server
6.14.6 Set a default domain name
We can complete the host name by a default domain name.But the default domain name is useful only
when there is no domain list.
In congure use the following command：
Named access-list
IP DNS Resolver
Enable IP DNS hostname translation
DNS dynamic update function
Command
Named access-list
IP DNS Resolver
Enable IP DNS hostname translation
Specify IP address of domain name server to use
Domain name server's IP address (maximum of 6)
Command
Model Name
3
0
Set a domain name server.
] Delete domain name server.
3
3
express delete a domain name server which IP address is
express delete all the domain name servers。
- 282 -
in configure, and it will
ip
function
in configure,and it will
ip
function