Chapter 3, Configuring Unchannelized Ocx/Stmx Interfaces - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

ERX 11.3.x Module Guide
Cables and connectors
LEDs
Alarms, errors, and events
56
SC full duplex
Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9
dB or 50-micron core cable with an optical loss of 7 dB
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide,

Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

Copyright © 2010, Juniper Networks, Inc.