Configuring The Member Devices; Configuring Access Between The Management Device And Its Member Devices - H3C S5120-EI Series Operation Manual

Removing a member device
To do...
Enter system view
Enter cluster view
Remove a member device from
the cluster
Rebooting a member device
To do...
Enter system view
Enter cluster view
Reboot a specified member
device

Configuring the Member Devices

Enabling NDP
Refer to Enabling NDP Globally and for Specific
Enabling NTDP
Refer to Enabling NTDP Globally and for Specific
Manually Collecting Topology Information
Refer to Manually Collecting Topology
Enabling the Cluster Function
Refer to Enabling the Cluster
Deleting a Member Device from a Cluster
Enter system view
Enter cluster view
Delete a member device from the cluster
Configuring Access Between the Management Device and Its
Member Devices
After having successfully configured NDP, NTDP and cluster, you can configure, manage and monitor
system-view
cluster
delete-member member-number
[ to-black-list ]
system-view
cluster
reboot member { member-number |
mac-address mac-address } [ eraseflash ]
Information.
Function.
To do...
Use the command...
Use the command...
Ports.
Ports.
Use the command...
system-view
cluster
undo administrator-address
1-13
Remarks
—
—
Required
Remarks
—
—
Required
Remarks
—
—
Required