Matrix User Controls - Bosch IRIS-Net User Manual

IRIS-Net

Matrix User Controls

Picture Name
Dante_Panel_
01
Bosch Security Systems B.V.
System_POWER_MUTE_
01
System_Supervision_02 The amplifier LED lights red when at least one of the errors
Testgenerator_01
Description
Selection of Dante device and Dante channel, MUTE button and editable channel
description. Indication of LINK status, Signal and 0 dB. Possible Connections:
N8000.DSP.DanteIn.ChX
Power-on/off and mute a single or a group of amps. Possible
Connections: RCM-24-Amp, RCM-26-Amp
selected in the dialog Supervision & Test occurs. Otherwise, the
LED lights green. The speaker LED lights red at the occurrence
of the load at the amplifier's output going outside the range set
by the minimum and maximum impedance values (a open or
shorted line). Otherwise, the LED lights green. Possible
Connections: RCM-24-Amp, RCM-26-Amp
Test tone generator panel with label field for the Remote
Amplifier. Possible Connections: RCM-24-Amp, RCM-26-Amp
User Manual
IRIS-Net | en 35
2017.05 | 3.20 | F.01U.119.956