Bosch IRIS-Net User Manual page 874

IRIS-Net
MAINS MODE
STANDBY MODE
BATTERY MODE
MAINS POWER FAIL
BEHAVIOR
AMPLIFIERS
CONTROLLER
ROUTERS
SWITCH ON PRIORITY
MAINS MODE
BATTERY MODE
Notice!
The "Power Calculator" tool can be used to calculate the power consumption of the system. The
tool can be found in directory "/Tools" or can be requested from the IRIS-Net support team.
Notice!
The properties "Operating Mode" and "Standby LED" can be used for advanced power
management configuration via the Task Engine, please refer to section Properties, page 788.
LineSupervision Dialog
The Line Supervision dialog allows configuring and control of the Controller line supervision. Line supervision can be
done via line impedance measurement method or the End of Line method using EOL 8001 or Plena EOL modules.
Please refer to the Controller manual for details about the different measurement methods.
Bosch Security Systems B.V.
If mains power is used for running the system, the Controller is in
MAINS MODE and the LED lights green. You can edit the name of this
mode in the text field. Press the POWER button to power on/off the
device.
If the system is in STANDBY MODE, this LED lights green. You can edit
the name of this mode in the text field.
If battery power is used for running the system, the Controller is in
BATTERY MODE and the LED lights green. You can edit the name of
this mode in the text field.
Select this option if Amplifiers should switch to standby mode if mains
power fails.
Select this option if the Controller should switch to standby mode if
mains power fails.
Select this option if Routers should switch to standby mode if mains
power fails.
Enter the minimum priority a signal (e.g. chime) must have to switch
the system on, if the system is in standby mode and mains power is
available.
Enter the minimum priority a signal (e.g. chime) must have to switch
the system on, if the system is in standby mode and mains power is
not available (battery mode).
User Manual
PROMATRIX 6000 | en 874
2017.05 | 3.20 | F.01U.119.956