Table of Contents
Advertisement
Solution 6000-IP
User Guide
I nt ro duc ti on
Your system helps to secure life, property and investments
against fire, theft and bodily harm. It consists of a keypad
(or keypads), sensors such as motion detectors or devices
located on doors and windows, and other sensing devices
designed to detect the presence of smoke or combustion.
The location and quantity of sensing devices will have
already been discussed with you by your alarm installer.
Control of your security system is achieved through
the unique graphic keypad, which displays all system
information in written text and graphical symbols. Its
versatility and ease of operation, make it ideal for any home
or business application.
Fe at ures
Listed below are the main features of the Solution 6000-IP
control panel.
ƒ Up to 144 Fully Programmable Zones
ƒ Up to 16 Access Doors
ƒ Fire Alarm Verification
ƒ Up to 990 User PINs
ƒ Up to 37 Programmable Outputs
ƒ GSM/GPRS/Ethernet Reporting Options
ƒ Optional Fingerprint Readers
ƒ Supervised Siren Driver
ƒ 16 Programmable TimeZones
ƒ Up To 8 Areas (Common Area Programmable)
ƒ Up To 16 Fully Supervised Keypads / Readers
ƒ National Broadband Network / IP Ready
ƒ Keyswitch Input (Programmable)
ƒ 2000 Event History Memory
ƒ EMI / Lightning Transient Protection
ƒ Programmable Via Keypad
ƒ Remote Programmable Via RAS Software
ƒ Automatic Test Reports
Us e r 's G u id e
This user's guide shows you how to use and maintain
your security system. It covers basic functions, such as
turning the system on and off as well as some general
programming. More complex programming and system
configuration should be performed by your installer.
Many of the programming functions described in this
guide will have already been programmed by your alarm
installer while others may need to be programmed or
changed by you. Depending on your particular system
configuration some features described in this manual
may not be available. Please discuss this with your alarm
installer.
Functions outlined in this user guide may require you to
enter your PIN (Personal Identification Number), so make
sure you choose a number that is easy for you to remember
but hard for someone else to guess. For security reasons
do not write this PIN down or give it to anyone else. If more
than one person needs to operate the system then you
should create a different PIN code for them if this has not
been done by your installer. This guide will explain how to
6
do this. See "MENU 1-1-2" on page 12.
Please take the time to familiarise yourself with the
following terms before reading the rest of this guide.
Zones
A 'Zone' is a detection device, or group of devices connected
to your security system. Zones are identified by the area
they monitor, such as a front door, bedroom window or
hallway.
Faulted Zones
When a zone (such as a door or window) is closed, it is
said to be 'normal' . When the door or window is open, the
zone is said to be 'faulted' . When you turn your system
on, you will usually want all of the zones in your system
to be normal, although, you can turn your system on with
faulted zones.
Zones Types
There are two basic types of zones, Non 24-hour and 24-
hour. See below.
Non 24-Hour Zones
Non 24-hour zones respond to alarm conditions
depending upon whether the system is turned on or off.
They are programmed to either respond instantly to alarm
conditions or to provide a delay for you to reach the keypad
and turn the system off. Various zones will be located
throughout your premises.
When you turn your system on, you have the option of
turning on all zones (All On), or just some of the zones (Part
On). Refer to the basic system operation section for more
information.
Bypassed Zones
A zone which has been bypassed will remain unarmed
when the system is armed. You may need to bypass a
zone when doing renovations in the building or if a sensor
becomes faulty. Bypassed zones will reset the next time
the system is disarmed.
24-Hour Zones
24-hour zones are always on and cannot be turned off,
even when the system is turned off (disarmed). There are
two types of 24-hour zones, fire zones and non-fire zones.
What Is An Area?
The control panel comes defaulted and programmed for a
single area configuration (Area 1), therefore, all zones are
assigned to Area 1. The alarm system can be divided into 8
individual areas. In this case, the security company would
assign different sensors (zones) to each area according to
the area they belong.
Example:
Partitioning a commercial business to 4 individual areas
may be as follows:
Area 1 – Main entry/exit area
Area 2 – Sales
Area 3 – Administration
Area 4 – Dispatch
Bosch Security Systems 10/22 BLCC615U
Advertisement
Table of Contents
