Bosch IRIS-Net User Manual page 387

IRIS-Net
DANTE OUTPUTS
The Dante Outputs DSP block is part of the DM-1 Dante Interface module. The dialog offers up to 8
output channels. The signal status of each channel is indicated.
Element Description
The "SIG" LED lights if a channel transmits a signal. In addition, the "0dB" LED lights whenever
the level of the signal reaches the 0dB mark, signaling that there is a chance of driving the signal
into distortion.
The MUTE button allows muting the corresponding channel.
Text field for assigning the Dante Transmit Channel Name to the corresponding channel. The
name is also used in the Dante Controller.
CAUTION: The use of * (asterisk) and = (equal) in names is not permissible.
OMNEO INPUTS
The OMNEO Inputs DSP block is part of the OM-1 OMNEO module. The dialog provides 8 input channels
from an OMNEO or Dante network.
Bosch Security Systems B.V. User Manual
DIGITAL MATRIX | en 387
2017.05 | 3.20 | F.01U.119.956