Bosch IRIS-Net User Manual page 937

IRIS-Net
This block is used for indicating a text message at the LC display of one or more call stations.
Depending on the software or hardware version used this block is called "CST Text block" or "DPC
Text block". The illustration left shows the CST Text block.
–
–
–
–
–
–
–
The Impedance Measurement block is used for executing a line measurement.
–
–
–
The Debounce block is used for debouncing a signal.
–
–
–
–
The Loop block allows building feedback loops in the Task Engine. Unstable conditions are
prevented by the block. To point out the function of this block, the input is at the right side, the
output is at the left side.
The Text Box allows labeling the task engine configuration. Click the Modify Properties entry in the
context menu to open the Edit Textbox dialog. This dialog allows editing the caption and e.g. font
size and font type.
Bosch Security Systems B.V.
Acknowledge: Enter 1 if pressing the ESC button at the call station should discard the text at
the display.
Address: Enter the CAN address of the call station, where the text should be indicated. Enter
0 if the text should be indicated at all call stations.
Buzzer: Enter 1 if the buzzer should signal the text indication additionally.
Clear: Enter 1 if the text should be cleared when the input changes from true to false.
Duration: Enter the time in seconds (without unit), how long the text should be indicated.
State: State of the block (1 = text is indicated)
Text: Enter the text to be indicated at the display. The maximum length is 20 characters,
including space and special characters. See table below for available characters.
Lines By Name = ALL
State: State of the block (1 = measurement active)
Test Function = LINETEST
Falling Edge: Enter 1 if the falling edge (change from true to false) at the input should be
debounced.
Rising Edge: Enter 1, if the rising edge (change from false to true) at the input should be
debounced.
State: State of the block
Time: Enter the debounce time in seconds (without unit)
User Manual
PAVIRO | en 937
2017.05 | 3.20 | F.01U.119.956