Bosch IRIS-Net User Manual page 832

IRIS-Net
Element
Supervision Dialog
The Supervision dialog is used for supervision of the DCS. You have the option to choose, which errors are combined
and indicated in a general fault message.
HINT: This Supervision dialog is only available when the DCS is connected to a DPM 8016.
Bosch Security Systems B.V.
Description
Name of the module
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
Name of the analog input
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
Name of the analog output
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
Voltage at the analog output during a RESET of the DCS system. The DCS system is reset for
example after changing the configuration or after a power outage.
Voltage at the analog output in error condition.
User Manual
PROMATRIX 8000 | en 832
2017.05 | 3.20 | F.01U.119.956