Button Types - Bosch IRIS-Net User Manual

IRIS-Net

Button Types

Action Button
Upon activation (the status changes from OFF to ON), an Action Button carries out a function of a Control. The
following example for the usage of the BUTTON TYPE Action Button shows how to configure a PWS-6 to switch
between presets in a conference room. Therefore, it is assumed that the IRIS-Net project includes a NetMax N8000
with three presets: MUSIC (U01, background music), SPEECH (U02, e.g. for presentations) and MUTE (U03). The three
upper buttons of the PWS-6 shall be configured to switch between these three presets.
1. Select "Configuration" from the contextual menu of the PWS Device in the IRIS-Net worksheet. The Configuration
dialog appears.
2. Add a front unit of the type PWS-6 to the left-hand frame of the three-frame window of the Configuration Dialog.
Either use the "drag and drop" method to drag the PWS-6 out of the category Front Units of the PWS objects
library or select the entry "Add PWS-6" from the left-hand frame's contextual menu in the window.
3. Select the first Control on the top of the added PWS-6 using the left mouse button. As an alternative, select the
Control by choosing the entry "Button 1" from the SELECT PWS CONTROL dropdown menu.
4. Use the BUTTON TYPE dropdown menu to assign the button type "Action Button" to the selected Control.
5. Name the first preset by entering "MUSIC" into the LABEL input field.
6. Use the ACTION dropdown menu to assign the action-type "Load N8000 Preset" to the selected Control.
7. Number the first preset by entering "U01" into the PRESET NUMBER input field.
8. Click onto the MODIFY CONNECTIONS button and select the N8000.
9. Repeat steps 4 to 9 to assign the preset "U02" to the second Control and the preset "U03" to the third Control as
well as to name the presets accordingly. The following illustration shows the Configuration Dialog after
configuration of the third button is finished.
Bosch Security Systems B.V.
Lets you select the preset number to be loaded when using BUTTON TYPE
Action Button and Action Load N8000 Preset.
Lets you select the number of parameters to be edited by up/down buttons
when using BUTTON TYPE Channel Selection.
Opens the Modify Functions & Connections dialog for allocating functions to a
control. Information on how to allocate Functions & Connections to a control
are provided in the chapter IRIS-Net > Editing Objects > Add Control Elements.
PWS PROGRAMMABLE WALL STATION | en
User Manual
714
2017.05 | 3.20 | F.01U.119.956