Bosch IRIS-Net User Manual page 984

IRIS-Net
NAME
CAN ADDRESS
FIND
CAN TERMINATION
BAUDRATE
CONNECTION
EXTENSION
COMPRESSOR
PILOT TONE
FAULT MSG
Bosch Security Systems B.V.
Select the desired button type and drag it from this dialog box onto the
button of a call station or a call station extension. Detailed information
about different types of buttons is provided on the following pages.
The Online / Offline indicator signals whether the call station is included
in the network or off-line. The red OFFLINE indicator signals that the
corresponding call station is off-line and that therefore no
communication is possible.
The green ONLINE indicator shows that the corresponding call station is
on-line and that sending and receiving data is possible. When on-line, any
parameter changes are immediately transmitted and active.
Name of the device.
Displays and lets the user enter the CAN address of the call station. Left-
click in the field and enter the desired address in the range from 1 to 16.
The entered value is adopted by pressing RETURN. The entered address
has to match the setting in the call station's menu and may only exist
once. When adding new call stations to an IRIS-Net project, CAN
addresses are automatically assigned in ascending order.
When pressing this button, the backlight of the call station's LCD screen
blinks regularly in quick succession. The status indicator of the call
station Device in IRIS-Net blinks at the same time. This function serves
for checking communication and for identification or search of a call
station in a larger system.
Press this button (ON) to activate the internal termination resistor of the
CAN bus in the call station.
The baud rate of the call station.
Name of the Controller the call station is connected to.
Number of Call Station extensions.
Press this button (ON) to activate the internal compressor of the call
station.
Press this button (ON) to activate the pilot tone supervision of the call
station.
HINT: When using the pilot tone supervision only one call station can
be connected to a CST bus.
Press this button (ON) if error messages should be indicated in the LC-
display of the call station.
User Manual
PAVIRO | en 984
2017.05 | 3.20 | F.01U.119.956