Bosch IRIS-Net User Manual page 192

IRIS-Net
Bosch Security Systems B.V.
Channel EQ Block:
The Channel EQ block displays the 6 Channel EQs of the corresponding
output channel. The 6 LEDs indicate which EQ-bands are being used
while the graph shows the frequency response of the Channel EQ block.
A single click with the left mouse button onto this block opens the
CHANNEL EQ page. Clicking with the right mouse button opens the
Copy & Paste menu, which allows copying all parameters of the
corresponding EQ block to any other EQ block within the same project.
Crossover Block:
This block represents the crossover within the corresponding output
channel. The graph shows the frequency response that results from the
set X-Over parameters. Three additional LEDs indicate the status of gain
trim, polarity and delay. A single click with the left mouse button onto
this block opens the X- OVER page.
Clicking with the right mouse button opens the Copy & Paste menu,
which allows copying all parameters of the corresponding X-Over block
to any other X-Over block within the same project.
FIR Filter Block:
This block represents the FIR Filter within the corresponding output
channel. The graph shows the frequency response that results from the
set FIR parameters. The LED indicate if the FIR Filter is being used. A
single click with the left mouse button onto this block opens the FIR
page.
Clicking with the right mouse button opens the Copy & Paste menu,
which allows copying all parameters of the corresponding FIR Filter
block to any other FIR Filter block within the same project.
Level Block:
The numerical field is identical to the numerical field below the level
controls in the Amplifier Control Panel. So the field indicates the
actually set attenuation, by which the internally specified amplification
is attenuated, in dB.
The MUTE button is for attenuating the output level of the
corresponding amplifier output to -∞. Clicking the MUTE button with the
left mouse button mutes the corresponding amplifier output. The MUTE
button is virtually pressed and lights red. Clicking the MUTE button
once again with the left mouse button disables the mute-function and
the amplifier output is again active. The MUTE button is virtually
disengaged and not lit.
Limiters Block:
This block provides graphical display of the limiter functions of the
corresponding output. The two LEDs indicate whether peak limiter or
thermal limiter have been activated. The graph provides indication of
the set values.
Clicking with the right mouse button opens the Copy & Paste menu,
which allows copying all parameters of the corresponding Limiters
block to any other Limiters block within the same project.
User Manual
REMOTE AMPLIFIER | en
2017.05 | 3.20 | F.01U.119.956
192