Bosch IRIS-Net User Manual page 943

IRIS-Net
DESTINATIONS
REQUEST
STATUS
Element
STOP SIGNALS (TYPE PULSE)
INVERT (TYPE PULSE)
DELETE
UPDATE
NEW
CONDITION
FILTER and condition list
START/ADD TRIGGER
IMMEDIATE
TRIGGERED
NEXT SEQUENCE
FILTER and trigger list
STOP/SUB TRIGGER
IMMEDIATE
TRIGGERED
NEXT SEQUENCE
Bosch Security Systems B.V.
The destinations (zones or groups) of the paging.
With a radio button, a STATIC destination such as zones or groups can be
selected and a DYNAMIC destination which refers to a selection zone pattern of a
Call Station. All call stations connected to the controller are available, but only
one can be selected.
Indicates if the paging condition is active or inactive.
Indicates if the paging is ON or OFF.
Description
Select a common stop condition for all signals of type PULSE. All available
condition elements are listed. This element is visible only if the type PULSE is
configured for at least on paging.
Select this Checkbox to invert the stop condition for all signals of type PULSE.
This element is visible only if the type PULSE is configured for at least on paging.
Press the DELETE button to delete the paging selected in the paging list.
Press the UPDATE button to apply the settings in the lower section of the dialog
to paging selected in the paging list.
Press the NEW button to create a new paging using the settings in the lower
section of the dialog and adds it to the paging list.
Select the condition to start a paging from the list. Enter a string (e.g. GPI) in the
text field FILTER to list only the conditions containing this string. Keywords can
be used as a condition to start a signal. See Keywords in condition list, page 765.
Select IMMEDIATE if the paging should start immediately or the zones should be
added immediately.
Select TRIGGERED if the paging should be triggered by the value selected below.
Select NEXT SEQUENCE if zones should be added only after the message ended.
When selected, the paging is started immediately.
Can only be used for MM-2 Messages.
Select the trigger condition from the list. Enter a string (e.g. GPI) in the text field
FILTER to list only the conditions containing this string.
Select IMMEDIATE if the paging should stop immediately or the zones should be
removed immediately.
Select TRIGGERED if the paging should be triggered by the value selected below.
Select NEXT SEQUENCE if zones should be removed only after the message
ended. When selected, the paging is stopped immediately after the message
ended. Can only be used for MM-2 Messages.
User Manual
PAVIRO | en 943
2017.05 | 3.20 | F.01U.119.956