Bosch IRIS-Net User Manual page 403

IRIS-Net
or
Channel EQ
The parametric 6-Band equalizer is used for loudspeaker equalization. Select the Channel EQ by clicking onto the
second block in the Flow Diagram Selector or by double clicking on the CHANNEL EQ block in the large Signal flow
Diagram.
Bosch Security Systems B.V.
This block represents the crossover of the FIR/FIR-Drive controller. The graph shows the
crossover filters currently. Three additional LEDs show the state of trim, polarity and delay.
Clicking on this block opens the X-OVER page.
This block represents the FIR filter of the FIR/FIR-Drive controller.
This block sets the level going into the Limiter stage. The setting is carried out via Up/Down
Spin controls or by directly entering a level value in dB. The MUTE button is used to mute the
signal. A left mouse click on the button will mute or unmute the signal.
This block represents the dynamics functions of the FIR/FIR-Drive controller. Two LEDs
indicate whether compressor and/or limiter or Peak and/or TEMP limiter are activated. The
graph indicates set values. Clicking on this block opens the DYNAMICS page.
A name for the output can be entered in the text box.
IMPORT opens a dialog box that allows loading Speaker Settings. This function imports a
complete loudspeaker parameter set into the FIR/FIR-Drive controller.
CAUTION: A loaded Speaker Setting becomes immediately audible when in the on-line
mode. Always make sure that the speakers setting that you are about to load is the desired
speaker setting containing the correct parameter set. Otherwise, under most extreme
circumstances, loading the wrong speaker set can permanently damage the connected
loudspeaker systems!
EXPORT opens a dialog box that allows saving speaker settings. This function stores the
complete settings of the FIR/FIR-Drive cont- roller as a parameter set in a file.
User Manual
DIGITAL MATRIX | en 403
2017.05 | 3.20 | F.01U.119.956