Bosch IRIS-Net User Manual page 404

IRIS-Net
Presentation in the Graphic Display
The following table summarizes the graphical controls shown in the display:
Element Description
Switch for selecting amplitude frequency response (magnitude) or
phase response (phase) indication in the bode plot
Switch for scaling the magnitude axis to 25 dB (± 12.5 dB) or to 50
dB (± 25 dB)
Shows the resulting transfer function of all filter and level trim
settings; the visible and audible result at the output. The audible
result is displayed in bright colors while electrical graphs are
indicated in dark colors.
The Separate switch allows indicating the individual transmission
function of the controller ways. The Sum switch allows indication of
the summed signal of all ways.
Switch for including programmed delay in the frequency or phase
response indication. The delays mainly affect phase response
indication.
Switch for additionally indicating measured speaker transfer
functions. For this function to be effective you first have to load
speaker data in the Speaker register sheet.
Filter Parameter
Element Default
Bosch Security Systems B.V.
Range Description
Name of the corresponding filter band.
User Manual
DIGITAL MATRIX | en 404
2017.05 | 3.20 | F.01U.119.956