Bosch IRIS-Net User Manual page 833

IRIS-Net
Element
DEVICE CONNECTED
MEMORY
WATCHDOG
FIRMWARE
DCS MODULES
POWER SUPPLY
COLLECTED ERROR: DCS
DEVICES
Bosch Security Systems B.V.
Description
The current condition of each type of error gets indicated. Green means no error, red
indicates that an error has been detected.
At the occurrence of a type of error for which the checkbox DETECT is ticked, the
COLLECTED ERROR: DCS DEVICES flag is set at the same time.
The CAN bus connection between DPM and DCS is broken.
Memory or Read/Write error.
Watchdog error in DCS. This error type is logged according standards, press the CLEAR
button to reset the error.
The firmware version of the DCS is not compatible with the DPM firmware version. A
firmware update is recommended.
The module configuration of the DCS in IRIS-Net does not match the actual module
configuration.
Supply voltage out of range.
The state of this error is forwarded to the DPM 8016, see Supervision Dialog, page 727.
Press this button to activate the COLLECTED ERROR: DCS DEVICES manually.
User Manual
PROMATRIX 8000 | en 833
2017.05 | 3.20 | F.01U.119.956