Bosch IRIS-Net User Manual page 968

IRIS-Net
NOTIFICATON At the occurrence of a type of error for which the checkbox DETECT is ticked, the
COLLECTED ERROR STATE flag is set at the same time. Additionally the FAULT
indicator light on the front panel of the controller lights, the FAULT relay opens
and a signal sound.
HOLD Detected types of errors for which the checkbox HOLD is ticked are stored.
Sporadic errors are indicated until the corresponding HOLD checkbox is
unchecked.
LOG
CONTROLS
ROUTER
DEVICE CAN connection between Controller and Router broken.
CONNECTED
MEMORY Memory error.
WATCHDOG Watchdog error of the device. This error type is logged conforming to standards,
press the CLEAR button to reset the error.
FIRMWARE The firmware version is not compatible with the IRIS-Net version used. A firmware
update is recommended.
POWER SUPPLY Error in the power supply of the device.
DSP Error in the digital signal processing (DSP) of the device.
HARDWARE Hardware error.
PG / LT Temperature overload of the device.
TEMPERATURE
GPI SUPERVISED Voltage at supervised GPI out of range.
AMP INPUTS
PILOT DETECTION x-
IN1
PILOT DETECTION x-
IN2
PILOT DETECTION A-
S1
PILOT DETECTION B-
S2
MASTER
COMBINED FAULT
STATE
Bosch Security Systems B.V.
Missing pilot tone at input 1 of cluster A or B.
Missing pilot tone at input 2 of cluster A or B.
Missing pilot tone at spare input 1 of cluster A.
Missing pilot tone at spare input 2 of cluster B.
The FAULT indicator light on the front panel of the device lights at the occurrence of this type
of error.
Manually setting or resetting an error.
User Manual
PAVIRO | en 968
2017.05 | 3.20 | F.01U.119.956