Bosch IRIS-Net User Manual page 948

IRIS-Net
Element
CAN INTERFACE
BAUD RATE
CAN STATE
CAN DEVICE LIST
OPEN INTERFACE
ENABLE
TCP Port
NUMBER OF LOGIC VALUES
Bosch Security Systems B.V.
Description
Transmission rate of the CAN-Bus. All devices on the CAN-Bus must be set to one
common transmission rate.
HINT: Editing the CAN BAUD RATE setting is possible in offline mode only.
Displays the current CAN-Bus status. Possible indications are: BUS OK, Bus
Heavy, Bus Off.
Lists the connected devices.
Set the checkbox to activate the ASCII control protocol of the device.
TCP port of the ASCII control protocol. The default port is 6273.
Enter the number of logic values of the task engine to be available via the ASCII
control protocol.
User Manual
PAVIRO | en 948
2017.05 | 3.20 | F.01U.119.956