Bosch IRIS-Net User Manual page 276

IRIS-Net
FIR-Filter Design
Element
OUTPUT DELAY
Individual output delays can be set for each output channel of the power amplifier.
HINT: The power amplifier's output delays can be used to compensate for the positioning of cabinets or speaker
arrays relative to each other or the original sound source, for example aligning the PA to the stage or aligning the
full-range loudspeakers to the subwoofers. The Output Delay parameter determines the delay time of the
corresponding channel or the distance between different loudspeaker clusters.
Bosch Security Systems B.V.
Default Range
1600 Hz 20 to 19999
Hz
16 kHz 21 to 20000
Hz
40 dB 21 to 100 dB
Band Pass
Description
ORDER of the FIR filter.
HI PASS sets the cut-off frequency of the Hi pass filter.
LO Pass sets the cut-off frequency of the Lo pass filter.
STOP RIPPLE sets the slope of the FIR filter.
Allows selection of the FIR filter type of the corresponding
output channel.
Press this button to generate the FIR filter.
User Manual
REMOTE AMPLIFIER | en
2017.05 | 3.20 | F.01U.119.956
276