Bosch IRIS-Net User Manual page 394

IRIS-Net
CLOCK ACCURACY
ORIGINAL
SRC WORD LENGTH
LOW GROUP DELAY
CHANNEL BLOCK
CRC
VALIDITY
CONFIDENCE
DIGITAL OUTPUTS
The DSP block Digital Outputs provides access to the eight outputs of an DO-1 Digital Output Card. Establishing
independent settings for each output channel is possible. A fader with ramping function as well as Mute and Invert
buttons serve as controls. Each output channel has its individual level indicator. Adjacent channels can be linked
together using the LINK button. This allows for the convenient synchronous setting of several output channels, e.g. for
stereo signals.
Element Default
Bosch Security Systems B.V.
Level 1...3
not
indicated,
17...24
Range Description
Permanent channel labeling. Channels are
numbered from LINE 1 to LINE 8.
Indicates the clock accuracy (in Consumer
mode only)
Indicates if the Original bit is set.
Indicates the source word length (in
Professional mode only)
Allow activating the option Low Group Delay
of the sample rate converter's interpolation
filter
Lights red, if the transmission of the Channel
Status Block was not correct.
Lights red, if the received audio data is not in
PCM format.
Lights red, if the signal quality is not good
(e.g. Jitter)
The first 5 bytes of the Channel Status block
are indicated for each input channel.
User Manual
DIGITAL MATRIX | en 394
2017.05 | 3.20 | F.01U.119.956