Bosch IRIS-Net User Manual page 875

IRIS-Net
Element
SPEAKER OUT
ZONE/LINE NAME
IGNORE
GROUND FAULT
IMP FAULT
SHORT FAULT
EOL FAULT
Bosch Security Systems B.V.
Description
System internal description of the zone or line.
Description of the zone or line.
Check this checkbox, if the result of the line measurement should be ignored. A
error of this zone or line will not be indicated in the system. Regular
measurements are carried out anyway.
HINT: If the checkbox is checked a short cut will not be indicated. If the zone is
connected via a line relay, the relay will be deactivated.
This LED lights red, if a ground fault error has occurred.
This LED lights red, if the measured impedance is out of the tolerance range.
This LED lights red, if there is a short cut at the zone or line (measured
impedance value below 25% of reference value). In this case the system will not
start calls or alarms in this zone or line.
HINT: If the zone is connected via a line relay, the relay will be deactivated
when there is a short cut (short cut protection for other lines on the same
amplifier).
This LED lights red, if a EOL error has occurred.
User Manual
PROMATRIX 6000 | en 875
2017.05 | 3.20 | F.01U.119.956