Bosch IRIS-Net User Manual page 90

IRIS-Net
Element Description
The flow diagram selector lets you select different function blocks, where the actually selected
block is displayed in a yellow engaged field.
Select A or B if the setting should be valid for the corresponding channel of the connected
amplifier. Select A and B if the setting should be valid for both amplifier channels.
The Channel EQ block displays the 5 Channel EQs of the corresponding output channel. The 5
LEDs indicate which EQ-bands are being used while the graph shows the frequency response of
the Channel EQ block. A single click with the left mouse button onto this block opens the
CHANNEL EQ page.
Clicking with the right mouse button opens the Copy & Paste menu, which allows copying all
parameters of the corresponding EQ block to any other EQ block within the same project.
This block represents the crossover within the corresponding output channel. The graph shows
the frequency response that results from the set X-Over parameters. Three additional LEDs
indicate the status of gain trim, polarity and delay. A single click with the left mouse but- ton onto
this block opens the X-OVER page.
Clicking with the right mouse button opens the Copy & Paste menu, which allows copying all
parameters of the corresponding X-Over block to any other X-Over block within the same project.
Bosch Security Systems B.V. User Manual
IRIS-Net | en 90
2017.05 | 3.20 | F.01U.119.956