Bosch IRIS-Net User Manual page 321

IRIS-Net
The dialog allows selecting which parameters that exist in the preset should be applied during loading. Parameters
whose checkbox has not been selected are ignored.
When going online having the option Send All to Selected Devices selected the scenes are stored in N8000.
HINT: The Save Preset keyword of the N8000 or P 64 allows to save the edited parameters of an existing scene by
pressing a Push Button (e.g. N8000_1.DSP.Savepreset=U01).
SUPERBLOCKS
Certain DSP blocks or Task Engine blocks that are frequently used in combination can be grouped together to form a
Super Block, which, by definition, is available in the category PROCESSING OBJECTS utilities of the N8000/P 64 or the
category Advanced of the DPM 8016 and can be used like any normal DSP/Task Engine block.
The following information is stored in a Super Block:
– Number and type of an individual or several DSP/Task Engine blocks
– The wiring of the DSP/Task Engine blocks
– The parameters of the DSP/Task Engine blocks
Creating a new Super Block
Please proceed as follows to create a Super Block:
1. Create the desired DSP or Task Engine configuration exactly the same, as it is to be contained in the Super Block.
2. Mark all desired DSP/Task Engine blocks that are to be contained in the Super Block.
3. Right-click on one of the marked DSP/Task Engine blocks. The contextual menu appears.
4. Select "Create Super Block" from the contextual menu. The Super Block dialog appears.
5. Enter the desired name for the Super Block in the "Enter Super Block Name" dialog and click on OK.
Bosch Security Systems B.V. User Manual
DIGITAL MATRIX | en 321
2017.05 | 3.20 | F.01U.119.956