Bosch IRIS-Net User Manual page 530

IRIS-Net
Element
Following properties can be used for advanced configuration of the TPI-5:
Property
Brightness
Layer after screensaver active
Startup layer
Element
MASTER
Network Error
Password Mismatch
MAX Connection
Limit
DSP Config Mismatch If the DSP structure saved in the TPI-5 is not identical with the DSP Structure of the N8000 /
General Error
N8000 Master Fault
Bosch Security Systems B.V.
Description
By clicking this button, the graphical user interface will be exported as a
project file (*ds)
Enter here the IP address matching the hardware IP address. The
default IP address of the TPI-5 is 192.168.1.102.
A name can be assigned to each touch panel to specify its use or
position. Click on the yellow entry field and enter the desired name.
Press Return on the keyboard to acknowledge the entered name.
Description
Allows adjusting the display brightness (0 = dark, 100 =
bright)
Select the layer to be shown after activation of the
screensaver.
Select the layer to be shown after power-on of the TPI-5.
Description
Select one of the Electro-Voice NetMax N8000 or DYNACORD P 64 operated by the TPI-5.
Master-Fault-Flag for all N8000 / P 64 used on the TPI-5 and the TPI-5 itself.
Network Error between a TPI-5 and a connected N8000 / P 64.
If the password is wrong the TPI-5 can not connect to a N8000 / P 64.
If too many users are connected to the N8000 / P64, the TPI-5 can not connect to the N8000 /
P64.
P64, then the TPI-5 can't go online with the N8000 / P 64.
General Error in the TPI-5.
The Master Fault Flag of a N8000 / P64, which is connected to the TPI-5, is active.
User Manual
TOUCH PANELS | en 530
2017.05 | 3.20 | F.01U.119.956