Rcm-24 User Controls - Bosch IRIS-Net User Manual

IRIS-Net
The Locally Used category holds all User Controls, which are used in the current project. The Globally Available
category holds all User Controls that are stored in the IRIS-Net User Controls folder. The content of the list depends on
the actually installed IRIS-Net version and on the devices that are currently available, i.e. it may differ from the list as
shown in the following illustration. The table provides a short description for each User Control.

RCM-24 User Controls

Following sets of connections are used in following table:
– RCM-24-Amp: P900RL,P1200RL,P3000RL,P900RT,P1200RT
– RCM-24-Amp-Channel: P900RL.ChA, P900RL.ChB, P1200RL.ChA, P1200RL.ChB, P3000RL.ChA, P3000RL.ChB,
P900RT.ChA, P900RT.ChB, P1200RT.ChA, P1200RT.ChB
Picture Name
Amp_MUTE+Supervision
Amp_MUTE_Panel
Amp_MUTE_Panel_02
Amp_Supervision_01
Amp_Supervision_02
Bosch Security Systems B.V.
Description
The MUTE A and MUTE B buttons activate ChA.Mute or
ChB.Mute. In the text field you can set the amp's CAN-
address. In Standby or Protection mode the LED lights red.
Otherwise, it lights green. Possible Connections: RCM-24-
Amp.
The MUTE A and MUTE B buttons activate ChA.Mute or
ChB.Mute. A click on the amp itself opens the Amplifier
Control Panel. Possible Connections: RCM-24-Amp.
The MUTE A and MUTE B buttons activate ChA.Mute or
ChB.Mute.
In Standby or Protection mode the LEDs light red. Otherwise,
they light green. LEDs can be labeled. Possible Connections:
RCM-24-Amp.
In Standby or Protection mode the LEDs light red. Otherwise,
they light green. LEDs can be labeled. Use the POWER button
to switch the amp on or off. Possible Connections: RCM-24-
Amp.
User Manual
IRIS-Net | en 26
2017.05 | 3.20 | F.01U.119.956