Bosch IRIS-Net User Manual page 891

IRIS-Net
FAULT MON
ACTIVE
OK
CONTROL OUT
STATE
Supervision Dialog
The Supervision window shows the condition of the PMX-4CR12. When on-line, all fault conditions are being indicated.
It is possible to select for each type of error whether it is displayed in a collected fault message, buffered and/or
indicated at the call station displays.
Element Description
STATE The current condition of each type of error gets indicated. Green means no error,
red indicates that an error has been detected.
Bosch Security Systems B.V.
Set the checkbox of supervised control inputs to activate the supervision.
Set the upper and lower bound (voltage) of the ACTIVE state of the
supervised control inputs.
Set the upper and lower bound (voltage) of the OK state of the supervised
control inputs.
It is possible to manually change the condition of the control outputs
(normally open contact / normally closed contact).
User Manual
PROMATRIX 6000 | en 891
2017.05 | 3.20 | F.01U.119.956